Please Roll over an image for a closer inspection...

Image 01 Image 01
Material SS17‐4PH
KPC's OD Concentricity of 10 Micron to Bore Heat treatment and copper

Special Process

Plating
Image 01Image 01
Material SS316
KPC's OD Concentricity of 10 Micron to Bore and ID,ID Total Runout of 20 Micron




Image 01 Image 01
Material Nitryle Rubber and SS17.4 PH
KPC's Assembly Tolerance of ±0.10






 

Image 01 Image 01
Material
KPC's OD Concentricity of 15 Micron to Bore and Total Runout of 15 Micron Bore
Special Process Anodising Blue
Image 01Image 01
Material SS316
KPC's Helical Groove to Suit the Assembly Tolerance of 20Micron
Image 01 Image 01
Material SS17.4 PH
KPC's OD Concentricity of 15 Micron to Bore, Total Runout of 15 Micron Bore Pependicularity 20Micron
Special Process Heat treatment

 

Image 01 Image 01
Material SS17.4 PH
KPC's Symitricity ocf 20 Micron to Bore to Flate face,Perpendiculer of 15 Micron and Bore Tolerance 20 Micron
Special Process Heat treatment
Image 01 Image 01
Material Al6061-T6
KPC's Hole Pitch Tolerance of 20 Micron ,Bore Tolerance of 10 Micron and Perpendiculer of 20 Micron to Face
Special Process Chromating
Image 01 Image 01
Material Aluminium Bronze
KPC's I.D and O.D Concetricity of 25 Microns and Slitting
Tolerance of 30Microns

 

Image 01 Image 01
Material SS17.4PH
KPC's Compound angle Hole of Pitch and Bore Accuracy of 15 Micron and Perpendicular of 20 Micron
Special Process Heat treatment
Image 01 Image 01
Material SS17.4PH
KPC's Hole Pitch Tolerance of 10 Micron ,Bore Tolerance of 10 Micron and Concentricity at I.D,O.D of 15 Micron
Special Process Heat treatment
Image 01 Image 01
Material SS17.4PH
KPC's Concentricity of 15 Micron,Straightness of 25 Micron For length of 200mm Length
Special Process Heat treatment

 

Image 01Image 01
Material SS17.4PH
KPC's Concentricity of 15 Micron ,Straightness of 25 Micron For length of 200mm Length
Special Process Heat treatment
Image 01 Image 01
Material SS17.4PH
KPC's I.D and O.D Concetricity of 15 Microns and Compound Angle Tolerance of 10 Min to Bore
Special Process Heat treatment
Image 01 Image 01
Material Nitronic 60 Steel
KPC's Bore Tolerance of 10 Micron Angular Groove of 60~0 15" to Face and Concentricity at I.D,O.D of 15 Micron
Special Process Heat treatment

 

Image 01 Image 01
Material SS17.4PH
KPC's I.D and O.D Concetricity of
20 Microns and Slitting
Tolerance of 30Microns
Special Process Heat treatment


Image 01 Image 01
Material SS17.4PH
KPC's Bore Concentricity to I.D 20 Microns to Length 250mm and Perpendicular of 20 Micron to I.D Bore to Vertical Hole
Special Process Heat treatment
Image 01 Image 01
Material SS17.4PH
KPC's Perpendicular of 10 Micron to Bore to Face
Special Process Heat treatment